ODAS stands for Open embeddeD Audition System. This is a library dedicated to perform sound source localization, tracking, separation and post-filtering. ODAS is coded entirely in C, for more portability, and is optimized to run easily on low-cost embedded hardware. ODAS is free and open source. Find more at: https://github.com/introlab/odasRequired Hardware
Before getting started, let's review what you'll need.
- Raspberry Pi 3 (Recommended). Not tested yet in Pi 2 Model B.
- MATRIX Voice or MATRIXCreator - Raspberry Pi does not have a built-in microphone, the MATRIX Voice/Creator have an 8 mic array - Buy MATRIX Voice/MATRIX Creator.
- Micro-USB power adapter for Raspberry Pi.
- Micro SD Card (Minimum 8 GB) - An operating system is required to get started. You can download Raspbian Stretch and use etcher.io to flash the image onto your SD Card.
- A USB Keyboard & Mouse, and an external HDMI Monitor - we also recommend having a USB keyboard and mouse as well as an HDMI monitor handy. You can also use the Raspberry Pi remotely through SSH, see this guide from Google.
- Internet connection (Ethernet or WiFi). Note: Pi 3 has built-in WiFi.
Make sure you have the Raspberry Pi running with your MATRIX board and SD card image with Raspbian flashed before starting. Install the following commands into your Raspberry Pi's terminal.1. Installing MATRIX Software
Add Repository & Key
curl https://apt.matrix.one/doc/apt-key.gpg | sudo apt-key add - echo "deb https://apt.matrix.one/raspbian $(lsb_release -sc) main" | sudo tee /etc/apt/sources.list.d/matrixlabs.list
Update Packages & Install
sudo apt-get update sudo apt-get upgrade
Install MATRIX Dependancies (one at a time)
sudo apt install matrixio-creator-init sudo apt install libmatrixio-creator-hal sudo apt install libmatrixio-creator-hal-dev
Reboot Your Device
Install MATRIX Kernel Modules
sudo apt install matrixio-kernel-modules
Reboot Once More
2. Installing ODAS
Install Required Dependancies (one at a time)
sudo apt-get install g++ git cmake sudo apt-get install libfftw3-dev sudo apt-get install libconfig-dev sudo apt-get install libasound2-dev sudo apt install libjson-c-dev
Clone & Build Our ODAS Repository
3. Run the demo!
cd ~/ git clone https://github.com/matrix-io/odas.git cd odas git checkout yc/add-matrix-demo mkdir build cd build cmake .. make
We need to run two applications. The first is called odaslive, this app performs all of the audio processing. The second we need to run the matrix-odas app that receives the results and use them to draw colors into the MATRIX Everloop.
cd ~/odas/bin ./matrix-odas &
Run odaslive in the same terminal:
for MATRIX Voice:
./odaslive -vc ../config/matrix-demo/matrix_voice.cfg
for MATRIX Creator use:
./odaslive -vc ../config/matrix-demo/matrix_creator.cfg
Make some noise!... you should see a blue lights indicating where the sound is coming from.
You can also run ODAS Studio to see a better visualization of the results from odaslive. Keep in mind that this cannot run with matrix-odas app
To Use ODAS Studio:
Have the ODAS Core app running on your Raspberry Pi and ODAS Studio running on your personal computer. Your Pi will use a TCP socket to connect to your personal computer.
The last step is to insert your personal computer's IP address into the ODAS Core configuration file. Insert the following command into your Raspberry Pi and edit the configuration file located at:
for MATRIX Voice
for MATRIX Creator
Replace the <IP> in each ip = "<IP>" lines with the IP address of your personal computer (there are 4 lines in total). Use <Ctrl + x>, press y, and then press enter to save your changes.
With ODAS Studio running on your personal computer, run odaslive in the Raspberry Pi with the following command:
for MATRIX Voice
~/odas/bin/odaslive -vc ~/odas/config/odaslive/matrix_voice.cfg
for MATRIX Creator
~/odas/bin/odaslive -vc ~/odas/config/odaslive/matrix_creator.cfg
Your Raspberry Pi should now connect to ODAS Studio and show your a graphical visualization of the sound your MATRIX device is receiving.
Please post any questions and suggestions you have in our MATRIX Community!